-
High Voltage Drop out Fuse Cutout
Drop out fuses are suitable for power systems with a frequency of 50Hz and a rated voltage of 35KV and below, installed on the high voltage side of distribution transformers or on the main lines of distribution. The main functions include areas with low requirements for protection performance, which can be used in conjunction with isolation switches to replace automatic air switches; It can also be used in conjunction with load switches to replace expensive circuit breakers. It also has short-circuit protection, overload and isolation circuits.
-
High Voltage Drop out Fuse Porcelain Outdoor Drop out Fuse Cutout 24KV36KV33KV35KV Drop-Out Fuse Hprwg2-35
Conditions of Use:
1. The ambient temperature is not higher than +40℃, not lower than -40℃2. The altitude does not exceed 3000m
3. The maximum wind speed does not exceed 35m/s
4. The seismic intensity should not exceed 8 degrees
-
High voltage outdoor ejection Drop out polymer power distribution composite fuse Drop out Fuse RW12-15 12kv 11KV 24KV 33KV 35KV 36KV 40.5KV 100A 200A
Conditions of Use:
1. The ambient temperature is not higher than +40℃, not lower than -40℃2. The altitude does not exceed 3000m
3. The maximum wind speed does not exceed 35m/s
4. The seismic intensity should not exceed 8 degrees
-
15KV Silica gel/ceramic Drop-Out Fuse HRW12-15
Conditions of Use:
1. The ambient temperature is not higher than +40℃, not lower than -40℃2. The altitude does not exceed 3000m
3. The maximum wind speed does not exceed 35m/s
4. The seismic intensity should not exceed 8 degrees
-
Outdoor high-voltage drop out fuse 15KV12kv 11kv
Conditions of Use:
1. The ambient temperature is not higher than +40℃, not lower than -40℃2. The altitude does not exceed 3000m
3. The maximum wind speed does not exceed 35m/s
4. The seismic intensity should not exceed 8 degrees