Products

Customized Cable Branch Box DFW-12

Overview:
The European-style cable distribution box is a cable engineering equipment widely used in the power distribution network system in recent years. Significant advantages such as no need for large-span crossover. The cable glands it uses conform to the DIN47636 standard. Generally use the rated current 630A bolted connection cable joint.

inquiry detail
Plastic Case Circuit Breaker MCCB-TLM1

Scope of Application TLM1Molded Case Circuit Breaker (M13-400, hereinafter referred to as MCCB), is new circuit breakers which have been designed and developed by the company using international advanced technology. The circuit breakers are of the following characteristics: compact size, high breaking capacity, short arc-over distance and shakeproof, is ideal products applied on land or ships. The rated insulation voltage of the circuit breaker is 800V (500V for M13-63), it is suitable for th...

inquiry detail
Cable Branch Box DFWK Ring main unit HXGN

Overview:
Widely used in urban power grid transformation, residential quarters, commercial centers and other urban power densely populated areas.

inquiry detail
JLSZW-10W Dry type combined voltage and current transformer

Overview JLSZW-10W combined transformer (also known as metering box) consists of voltage and current transformers. This product is used for AC 50HZ, rated voltage below 10KV three-phase line, used for voltage, current, electric energy measurement and relay protection, suitable for urban power grid, rural power grid outdoor substations, and can also be used in various substations in industrial enterprises. The combined transformer of active and reactive energy meters is called a high-voltage e...

inquiry detail
HY5WS/HYSWZ Arrester 10KV11KV12KV15KV

Overview This arrester uses zinc oxide resistor with excellent nonlinear volt ampere characteristics. Therefore, compared with traditional silicon carbide arrester, the protection characteristics of the arrester under steep slope, lightning wave and working wave are greatly improved. In particular, zinc oxide resistors have the advantages of good steep slope response characteristics, no delay for steep slope voltage, low operation residual voltage and no discharge electric dispersion. It is m...

inquiry detail
ZN63 (VS1)Side-Mounted Indoor High-Voltage Vacuum Circuit Breaker

Overview ZN63(VS1)-12 series indoor high-voltage vacuum circuit breaker is an indoor high-voltage switchgear, suitable for three-phase power system with rated voltage of 12kV and frequency of 50Hz. It is used as protection and control electrical appliances. Excellent performance, especially suitable for places that require frequent operation at rated current, or break short-circuit current many times. ZN63(VS1)-12 series side-mounted vacuum circuit breaker adopts fixed installation and is mai...

inquiry detail
Knife Switch HS13BX

Applicable Scope HD series, HS series open-type knife switch and knife-shaped transfer switch (hereinafter referred to as switch) are suitable for the complete set of power distribution equipment with AC 50Hz, rated voltage up to 380V, DC up to 220V, rated current up to 3000A, as an infrequent manual connection It can be used for passing and breaking AC and DC circuits or as an isolating switch. in: 1.1 The central handle switch is mainly used in the power station, it does not cut off the cir...

inquiry detail
Professional customized withdrawable switch cabinet GCK

Overview GCK low-voltage withdrawable switchgear is widely used in power plants, metallurgical rolling, petrochemical, light industry and textile, ports, buildings, hotels and other places as AC three-phase four-wire or five-wire system, voltage 380V, 660V, frequency 50Hz, rated It is used for power distribution and motor centralized control in power supply systems with currents of 5000A and below. GCK is a high-level low-voltage switchgear assembled and assembled, and is designed to meet the...

inquiry detail
GCS High and low voltage draw out switchgear

Overview GCS low-voltage withdrawable switchgear is suitable for power distribution systems in power plants, petroleum, chemical, metallurgy, textile, high-rise buildings and other industries. In large power plants, petrochemical systems and other places with a high degree of automation and requiring interface with computers, it can be used as a power generation and power supply system with a three-phase AC frequency of 50 (60) Hz, a rated working voltage of 400V, 660V, and a rated current of...

inquiry detail
Customized high-voltage switchgear GGD

Overview GGD type AC low-voltage power distribution cabinet is suitable for power distribution systems with AC 50Hz, rated working voltage of 380V, and rated working current of 5000A for power users, such as power plants, substations, industrial and mining enterprises, as power conversion, lighting and power distribution equipment. for distribution and control. The product has the characteristics of high breaking capacity, good dynamic and thermal stability, flexible electrical scheme, conven...

inquiry detail
Outdoor high-voltage drop out fuse 15KV12kv 11kv

Conditions of Use:
1. The ambient temperature is not higher than +40℃, not lower than -40℃

2. The altitude does not exceed 3000m

3. The maximum wind speed does not exceed 35m/s

4. The seismic intensity should not exceed 8 degrees

inquiry detail
High Voltage Fuse Base Fuse holder Ceramic/silica gel

Effect:
Fixed fuse tube and external lead wire. When the fuse is connected to the circuit, the melt is connected in series in the circuit, and the load current flows through the melt. When a short circuit or overcurrent occurs in the circuit, the current through the melt makes it heat up; when it reaches the melting temperature of the molten metal, it will fuse itself, and the fault circuit will be cut off along with the arc burning and arc extinguishing process to play a protective role.

inquiry detail