Fuse

High Voltage Drop out Fuse Cutout

Drop out fuses are suitable for power systems with a frequency of 50Hz and a rated voltage of 35KV and below, installed on the high voltage side of distribution transformers or on the main lines of distribution. The main functions include areas with low requirements for protection performance, which can be used in conjunction with isolation switches to replace automatic air switches; It can also be used in conjunction with load switches to replace expensive circuit breakers. It also has short-circuit protection, overload and isolation circuits.

inquiry detail
Powerful manufacturers directly sell high-voltage fuses

High voltage current limiting fuse
Equipment used to protect against overload or short circuit of power equipment
High voltage current limiting fuse is suitable for AC 50HZ, rated voltage 3 In the 6-12KV system, it can also be used in conjunction with other electrical appliances (such as switches, contactors, etc.) as overload or short circuit protection for power equipment such as motors, transformers, capacitors, etc.

inquiry detail
Manufacturer of high-voltage current limiting fuse links

inquiry detail
High Voltage Drop out Fuse Porcelain Outdoor Drop out Fuse Cutout 24KV36KV33KV35KV Drop-Out Fuse Hprwg2-35

Conditions of Use:
1. The ambient temperature is not higher than +40℃, not lower than -40℃

2. The altitude does not exceed 3000m

3. The maximum wind speed does not exceed 35m/s

4. The seismic intensity should not exceed 8 degrees

inquiry detail
High voltage outdoor ejection Drop out polymer power distribution composite fuse Drop out Fuse RW12-15 12kv 11KV 24KV 33KV 35KV 36KV 40.5KV 100A 200A

Conditions of Use:
1. The ambient temperature is not higher than +40℃, not lower than -40℃

2. The altitude does not exceed 3000m

3. The maximum wind speed does not exceed 35m/s

4. The seismic intensity should not exceed 8 degrees

inquiry detail
Powerful manufacturers directly sell high-voltage fuses 3.6KV7.2KV10KV11KV12KV15KV22KV24KV33KV35KV36KV40.5KV

verview This series of high-voltage fuses can be used for 50 hz/63 hz indoor systems, with rated voltages of 3.6 KV, 7.2 KV, 24 KV, 40.5 KV, etc. They are generally used together with other switchgear (such as load switches, vacuum contactors), and can also be installed with bases to protect transformers and other electrical and gas equipment from overload or open circuit. It is also an essential accessory of high-voltage switch box, ring circuit cabinet, high and low voltage top load transfo...

inquiry detail
High Voltage Fuse XRNP-10/0.5A1A2A indoor

Overview This product is suitable for indoor AC 50Hz, rated voltage 3.6-40.5KV system as overload and short-circuit protection of voltage transformers. This fuse has a large cutting capacity and can also be used to protect the road separated by the power system. , when the line short-circuit current reaches the value, the fuse will cut off the line, so it is a recommended appliance to protect the power equipment from damage. (Passed the type test of the National High-voltage Electrical Applia...

inquiry detail
XRNT-24/XRNT-35 High Voltage Fuses

Overview This series of product is applied to power system with indoor AC50HZ-60HZ, rated voltage being 3. 6kv -405kv, and it could be cooperation-uscd with other protection electric device(such as vacuum con-nector,load switch etc) to be overload or short protection compon-ents of highvoltage motor, electrical voltage transformer voltage mutual conduc torand other elcctrical equipment This product is suitable for indoor AC 50Hz, rated voltage 3.6KV, 7.2KV, 12KV, 24KV, 40.5KV systems. It can ...

inquiry detail
High Voltage Fuses XRNP Threaded

Overview This product is suitable for indoor AC 50Hz, rated voltage of 3.6KV, 7.2KV, 12KV, 24KV, 40.5KV system, can be used with other switches, electrical appliances, such as load switches, vacuum contactors, as power transformers and other electrical equipment Short circuit and overload protection components are also necessary supporting products for high voltage switch frame, ring network frame, high and low voltage prefabricated substations. It can reliably cut off any fault current betwe...

inquiry detail
15KV Silica gel/ceramic Drop-Out Fuse HRW12-15

Conditions of Use:
1. The ambient temperature is not higher than +40℃, not lower than -40℃

2. The altitude does not exceed 3000m

3. The maximum wind speed does not exceed 35m/s

4. The seismic intensity should not exceed 8 degrees

inquiry detail
Outdoor high-voltage drop out fuse 15KV12kv 11kv

Conditions of Use:
1. The ambient temperature is not higher than +40℃, not lower than -40℃

2. The altitude does not exceed 3000m

3. The maximum wind speed does not exceed 35m/s

4. The seismic intensity should not exceed 8 degrees

inquiry detail
High Voltage Fuse Base Fuse holder Ceramic/silica gel

Effect:
Fixed fuse tube and external lead wire. When the fuse is connected to the circuit, the melt is connected in series in the circuit, and the load current flows through the melt. When a short circuit or overcurrent occurs in the circuit, the current through the melt makes it heat up; when it reaches the melting temperature of the molten metal, it will fuse itself, and the fault circuit will be cut off along with the arc burning and arc extinguishing process to play a protective role.

inquiry detail